（1） Operation essentials and operation mode of floor brushing machine
Operation essentials of floor brushing machine
Before operation, untie the wiring on the machine, check whether there is leakage, and then step on the pedal to adjust the handle to the angle convenient for operation. The machine body is horizontally inverted, the brush plate, the grinding plate or the prick plate are installed, and then the machine body is straightened;
Check and confirm that the switch is in off state, then plug it into the power socket;
Retract the wheel, hold the handle with both hands, pull on the wiring with one hand, and then turn on the switch. At this time, the brush disc keeps level with the ground, and the brush disc begins to rotate. After confirming that there is no fault, the operation can be started;
When working, it is not to move the machine back and forth or left and right by the strength of one's own arm, but to move the machine itself by pressing the handle, so that the human body naturally moves with the machine;
When the operation is finished or stopped, turn off the switch to stop the machine.
Operation progress mode
When working, make the scratches on the brush plate or grinding plate in a horizontal straight shape, and step back bit by bit. There should be several centimeters overlap between the scratches of the brush plate or grinding plate in the latter line and those in the former line;
When working close to the wall, it is not easy to stain the wall when moving from left to right;
When moving, pay attention to the wiring placement, do not make the wiring entangled on the feet or indoor facilities, and do not make the wiring affect the operation.
（2） Operation essentials and operation mode of vacuum cleaner (suction machine)
Operation essentials of vacuum cleaner
Grasp the working rod and place the suction port on the ground naturally. If you press too hard, it may hinder the dust collection;
Grasp the angle of suction nozzle. When pulling backward, the face of the suction nozzle should be slightly raised towards itself. When pushing forward, the suction nozzle should be slightly raised. In this way, air and dust are easy to enter and easy to operate;
Master the pulling speed. It should be pulled gently, as if by stroking. If it is pulled too fast, it may hinder the dust collection;
When pulling the suction nozzle, pay attention to make the carpet fibers arranged in order as far as possible.
Operation progress mode
Generally, the operation starts from the inside corner, and goes back to the entrance while working. In this way, the operator's footprints are not left;
Generally, the vacuum cleaner should be pulled from front to back and moved horizontally. There should be about 3cm overlap between adjacent dust collection parts;
The main body and accessories of the machine should be placed at the entrance as far as possible, so as to facilitate the withdrawal after operation, without leaving traces on the carpet.
Jinan cleaning service today to share the wonderful content to you, more wonderful content please click on our website http://www.571bd.cn Leave a message, or call directly, we will have special staff to serve you