1. Cleaning step 1: remove rubbish and dust
After decoration, the ground will accumulate more decoration waste. Therefore, the first step to clean up the wasteland is to decorate the garbage in the house, and the next step is to clean up the obstacles. Then clean thoroughly with a multi-function cleaner or stir thoroughly with a feather duster.
2. Key space cleaning: Kitchen + toilet
Adhere to the principle of top-down, first understand the ceiling materials, look at PVC, aluminum alloy plate or paint, and then select different materials according to different cleaning methods; use a cleaning ball or brush to clean the wall, tile cracks and traces left by tile glue surface, paint and cement stains; use a towel. Clean bathroom accessories, stainless steel cleaning solution for various faucets and pipe fittings; after comparison, use washing machine to clean the floor, especially the corner of the floor, unclean cleaning ball, blade corner washing machine, and remove cement stains.
What are the steps of opening up wasteland and cleaning in Changsha?
3. Key parts cleaning: glass cleaning
Wipe part or part of the glass frame with a towel, and then apply it with glass solution. The glass is evenly distributed from top to bottom, and the stubborn stains are removed with a shovel. Repeat the above steps and scratch from top to bottom. After scratching, wipe the water marks on the frame with a dry towel, and wipe the water marks on the glass with a deerskin towel.
4. Key components cleaning: doors and frames
To distinguish between the door materials, use detergent to dilute with towel, from top to bottom, wipe the towel quickly, from the top of the door, from left to right, without omission, glue stains can be treated with glue remover; the procedure of the box must be the same; no omission, no dead corner.
5. Cleaning and finishing: floor cleaning
After all the work, the floor was finally cleaned up. Before cleaning, it must be noted that the floor is wood floor, ceramic tile or stone, and select special cleaning agent according to the material. The stains on the blade can be removed with the blade, and the stubborn ones can be treated with glue. For the baseline, you can use a towel to wipe off all kinds of rubber tracks and paint points;
6. Don't neglect the cleaning of corners and other details.